Model Number

MEP-20000A

Ⅰ．Description

This mobile power is a multi-functional and high-capacity product which could serve as both charger and battery and provide power for your mobile phones, MP3, MP4, digital camera and portable computer at anytime and anywhere. The unit is highly praised for its great capacity, compatibility, portability, extensive applicability .

Ⅱ．Use instruction

1. Battery capacity indication:

Make sure there is enough power before use. The unit uses a LCD to indicate the remaining power level . you can see its indication when you press the switch OK. There are seven lights in the LCD. When the unit has been fully charged, the seven lights will all display. When the remaining power is lower than 10%, the left light will flash to remind that the unit should be recharged.

2. Switch indication 1:

Click the button OK of the mobile powe it will display the remaining power. Press the button over 2 seconds, the unit will be on and the indicator will display constantly. Also press the button over 2 seconds to turn the power off. The unit can detect a output signal. So it will turn off automatically if there is no any device to be charged for over one minute in order to saving energy.

3. Switch indication 2:

When the unit turns on, you can choose a voltage you need through clicking the button. The different voltage will display by clicking the button from 5.5v,7.2v, 9v, 16v to 19v for different devices. When the voltage is suitable for your device ,please stop choosing and connecting the unit with your device that needs to be charged with a special cable attached as an accessory. Then the unit begins to charge for your device .

4. Charge instruction:

1) The power has a specified adaptor with the output voltage of 19v. Plug the tip of the adaptor into the jack of 19v printed on the right side of the unit , and plug the adaptor into an AC power socket. The unit will begin to recharge. The charging time will be approximately 4 hours.

2) The indictor would flash while charging .And it indicates the current power level of the unit. When your device has been fully charged, the light will stop flashing. You can disconnect the adaptor to stop charging.

3) The unit has a high capacity and a large input current. The temperature will increase by 10℃ while recharging for the unit .So please avoid charging under high-temperature condition. And also a large output current will occur when using the unit to charge for a portable computer ,and the temperature will arise by about 15℃. To prevent this, do not use it in extremely hot and poorly ventilated environment. When you feel the unit is very hot and the temperature is about 55℃ here, please  immediately stop charging to prevent the damage to the unit .

4) You can use the nuit to charge for a portable computer while recharging to the unit in the same time. Of cause, it is acceptable to charge for all devices such as a mobile phone and a digital camera that their input voltages are under 19v while the unit is recharging.. And you can use an original adaptor of your portable computer to recharge to the unit if its output power is 19v ,3A or above.

5) The unit has three specified cables and various types of connectors to charge for different types of portable computers and digital devices such as mobile phones and cameras. If your device has a unique input plug or no input socket , there is no connector to match with it., we also provide a versatile connector to charge for it through taking the battery off from the device.

6) Choose a suitable output voltage for your device according to the labeled voltage in front of the output panel as well as the displayed voltage on the LCD. Please note that you could not charge for a low-voltage device with a high voltage or it might cause damage to your device. Usually the normal input voltage for mobile phones is 5.5v, digital cameras and cinematographs are from 7.2v to 9v, and portable computers are 16v and 19v respectively . Please make sure the right voltage to be selected before charging.

7) Once the device begans to charge, do not attempt to change the voltage through clicking the power button of the unit in order to prevent damage to the device. If it is found that the voltage in working does not match your device, please disconnect the unit and choose the right voltage again . Then reconnect to the unit to charge.

III．Specifications

Battery: Lithium-ion Cell           Output voltage: DC5.5v，7.2v ,9v，16v，19v

Input Voltage: 19V±0.2V

Input Current:≤3000mA                             Capacity:20000mAh

Dimensions: 208*124*16mm                        Cycle Life: ≥ 600 times

Storage and transportation temperature: -20℃-50℃    

Operation Temperature: -10℃-35℃

Weight: 610g            

Ⅳ．Accessories

1. 1 Adaptor, 19V , 3A;

2. 1 cable and 9 connectors for different types of  the portable computers.

3. 1 cable and 7 connectors for different types of mobile phones (including Motorola, Nokia, Sangsun, SonyEricsson and LG)

4. 1 cable and 5 connectors for different types of digital cameras (including Sony, Samsung, Nikon and Olympus).
5. 1 versatile connector that can charge other batteries except that of portable computers.

6. 1 LED light which can be directly used with plugging into the USB socket of the unit .

7. 1 user manual including warrant card and table of connector types.

8. Option: you can freely choose the needed connectors if you do not want them all.

Ⅴ．Product characteristics

1. High capacity:

  The mobile power can charge most mobile phones for 20-32 times with 2 hours charging period every time. It can support a 16v portable computer and a 19v one to last working for 4 hours when the battery of the computer is used up . 

2. Widely compatible

Suitable for many circumstances where it is convenient to charge for your portable devices such as in business traveling, camping, exploration, meeting and other places without power to be used.

3. High reliability and transformation rate:

  Adopting an intelligent chip from America and highly-performing controlling circuit, the unit can realize the power transformation up to 85% about . It also has these functions of charging protection, discharging protection and short circuit protection. It is safe and environment-friendly.

4. Fashionable

It has the nice figure. And it is easy to carry and could be used at any time.

5. Power indication:

  The LCD would directly display the voltage and power level while charging.

6. Long cycle life:

It can be recharged up to over 600 times and work over 2 years in normal conditions.

Ⅵ．Warning and Notice

1. Do not use the unit in extreme heat environment, such as exposure to the strong direct sunlight or in a car in hot days. If so might cause the unit overheat and degrade its performance and shorten the life of use. The Lithium-ion Cell is dangerous in a extreme heat environment too.

2. Keep the unit in a dry and cool place with the temperature range of -20C to 50℃. Avoid contact with the corrosive matters and keep it away from fire, heat and water sources. The battery of the unit should be kept a 50% capacity .It should be recharged with the frequency of three months .

3. Choose a right voltage to charge for your devices to provent damage to them.

4. Make sure of the proper use of the unit under the user manual.

Ⅶ．Warranty

We warrant providing the repair service free charge if any malfunction occurs within one year upon the user purchases.

Ⅷ．Warrant card adheres

Please cut along the dotted line。

Warrant card

User File                                                       Date:

Warrant items

1. A same item of product can be provided if the original one has any malfunction and in condition that the item and package is complete without any man-made damage .

2. Warrantee enjoys a one-year repair service upon the date of purchase free charge (accessories not included).

3. The warrant service is subject to normally using.

4. We are not responsible for any damage or loss in the delivery and any unauthorized third-party repair would be seen as a breach of the warrantee. If the product’s label, finishing date or serial no. has been tear off; customer misused the product without following the manual, we do not hold any responsibility in the warrantee.